Wiring #
1. In the engine bay on right side shock tower (looking from bumper) there is a plug that needs to be disconnected and rewired to the TCU
Rewire it according to this schematic (pin numbers are on the image above):
| Gearbox plug in the car | TCU plug | Description |
|---|---|---|
| 3 | 35 | Ignition |
| 5, 7 | 69 | CAN 1H |
| 6, 8 | 68 | CAN 1L |
| 11, 13 | 67 | CAN 2H |
| 12, 14 | 66 | CAN 2L |
| 15 | 51-53 | +12V Battery |
2. Connect gearbox plug from TCU straight into gearbox
TunerPro configuration #
Start by reading about Tuner Pro setup
Set CAN1 and CAN2 to 32 (or 35 for DCT car) and set paddles1 to 13(OEM can paddles)
